Advanced meter data import interface

The advanced meter data interface imports advanced meter data (also known as interval data, time or use data or smart meter data) in industry-standard formats. This interface accepts

1. NEM12 (Australia)
2. EIEP3 (New Zealand)

NEM12

The "Interfaces\Advanced Meter Data Import" folder is polled constantly (24x7).

1. If a NEM12 file is successfully processed it is placed in "Interfaces\Advanced Meter Data Import\ArchiveYYYYMM\DD".
2. If it is not able to be processed it is placed in the "Interfaces\Advanced Meter Data Import\Error\YYYYMM\DD" folder.

EIEP3

The "Interfaces\Advanced Meter Data Import\EIEP3" folder is polled constantly.

1. If an EIEP3 file is successfully processed it is placed in "Interfaces\Advanced Meter Data Import\EIEP3\Archive\YYYYMM\DD".
2. If it is not able to be processed it is placed in the "Interfaces\Advanced Meter Data Import\EIEP3\Error\YYYYMM\DD" folder.

File Format

Must be a CSV file with the following columns (Bold = Mandatory):

1. NEM12 - in the NEM12 file, each NMI (site identifier) is shown in the 200 record. The 200 record then shows the 30 or 15 minute kWh consumption values for each interval for each data stream (or meter) for each day.
2. EIEP3 - in the EIEP3 file, each ICP (site identifier) is shown in column B, each datastream (or meter) in column C and the 30 or 15 minute kWh consumption values in column G.